China Transducer Calibration System | general | Forum

 
You must be logged in to post Login Register


Register? | Lost Your Password?

Search Forums:


 






Minimum search word length is 4 characters – Maximum search word length is 84 characters
Wildcard Usage:
*  matches any number of characters    %  matches exactly one character

China Transducer Calibration System

No Tags
UserPost

1:55 am
August 8, 2018


jahda4

Member

posts 10

VENZO 820 Shaker Control System

State-of-the-art Hardware
· 1~2 Analog input channels
· 1 Drive Channel
· 450MHz DSP Processing
· 100 Mbps Ethernet port connecting to PC (without grounding problem)
· -30~70℃Working Temperature
· No-fans structure to reduce the background noise
· 160 dB / Octave Anti- aliasing Filter
· 1 AUX Channel
· 24-bit ADC/DAC, 130dB dynamic range
· 204.8 kHz Sampling Rate, 40kHz Frequency Range
· 1GB Internal Flash Memory Stores Test Configuration
· Floating Ground Design Reduces Ground Loop Problems
Classical Control Functions
· Sine
· Random
· Resonance Search and Tracked Dwell
· Classical Shock

Analysis Capabilities and Auxiliary Functions
· THD Detection
· Data Recorder
· FFT Analysis
· SRS Analysis
· FRF
· Waterfall View
· Signal Calculation
· Signal Cache
· Signal Editor
· Word/PDF Test Report
· Email Report
· Off-line view
· Transient Capture, Force/Deflection Analysis, Shock Response Analysis
· Working Temperature: -30~70℃
· Humidity: 5%~95% RH
· Consumption: 10W (VENZO 820), 20W (VENZO 880)
· Power: 100~240VAC(50~60Hz)
· Enclosure Rating: IP43
· PC Connection: high-speed standard Ethernet interface
· Anti-vibration Performance: 10-60 Hz @ 0.15 mm peak;60-150 Hz @ 2 gn, conform to IEC 60068-2-6;
· Anti-impact Performance: 10 gn for 16 ms,conform to IEC 60068-2-27
· In Accordance with EMC Standards: EN61326-1:2006, EN61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008
· Safty: EN 61010-1:2001
· Compliance: CE Marking
Hardware Specifications
· Input: 1~2 channels
· Input Interface: BNC Connector
· Input Resolution: 24-bit ADC
· Coupling: AC Gnd, AC Dif, DC Gnd, DC Dif, Charge, IEPE
· TEDS: IEEE 1451.4 compliant, automatic-reading
· Anti-aliasing Filter: analog and digital anti-aliasing low-pass filters
· Input Dynamic Range: 135dB
· SNR: > 100dB
· Input Voltage: Ranges ±10, ±1 or ±0.1 VPEAK
· Input Impedance: 1MΩ(Single-ended)2MΩ(differential)
· Maximum Input: ± 36VPEAK without damage
· Input Channel Crosstalk: <-100dB@1kHz
· Amplitude Channel Match: 0.1 dB
· Channel Phase Match: better than ±1.0 degree, up to 20 kHz
· Input Signal Type: Charge, Voltage, High-integrated
· Input / Output Channel Crosstalk: <-100dB
· Total Harmonic Distortion: <-100dB
· Frequency Accurancy: as fine as 0.000001Hz

· Output:1 Drive Channel
· 1 AUX Channel: can be configured as drive channel in dual-axis control
· Output Interface: BNC Connector
· Output Resolution: 24-bit DAC
· Max. Sampling Rate: 204.8kHz
· Frequency Range: 80kHz
· Dynamic Range: ≥108dB
· Output Voltage Range: 10V F.S
· Max Output Current: 20 mA
· Total Harmonic Distortion: <-100dB@1kHz
· PC Configuration: Windows XP/Vista/ 7 /8 Operating System and an Ethernet port.
· Microsoft Word / Excel and PDF are recommended.

Main Classis
· Dimension (mm): 290*210*60 (VENZO 820); 390*280*60 (VENZO 880); 430*280*60 (VENZO 8160)
· Weight: 2.6 kg (VENZO 820), 4.2 kg (VENZO 880), 5.0 kg (VENZO 8160)
· Front-end Panel: three LED lights indicate the status of "Power", "Ready" and "Control". The red Abort button is for emergency stop of the vibration test system.
· Rear Panel: connectors include 2/8 Analog Input Channels, a Drive Channel, a100 BASE-T Network Port, an AUX channel (only for VENZO 880, can be adjusted to 2-axis drive control channel), a grounding-end, an External Emergency Abort Jack and a terminal block of digital I/O lines.China Transducer Calibration System
website:http://www.dtc-techs.com/trans…..on-system/

No Tags

About the marc Forum

Forum Timezone: UTC -7

Most Users Ever Online: 203

Currently Online:
18 Guests

Currently Browsing this Topic:
1 Guest

Forum Stats:

Groups: 3
Forums: 9
Topics: 17378
Posts: 17677

Membership:

There are 56548 Members
There have been 10 Guests

There are 3 Moderators

Top Posters:

gbalychik – 7085
qocsuing – 1491
seestyle – 792
davy_agtenii – 516
papers15 – 461
sinocooling – 193

Recent New Members: TechToRoms, proimmediateedge, immediateepre, ketoxplodeProfi, TechToDown, immediatebitwavepro

Moderators: Paul (21 Posts), john (10 Posts), jon (2 Posts)